Melt-blown filter cartridge is tubular filter element made of non-toxic and odorless polypropylene particles through heating melting, spinning, drafting and forming. Products mainly made of polypropylene are named PP melt-blown filter cartridges.

Technical Parameters

Filtration Rating: 1μm, 3μm, 5μm, 10μm, 20μm, 30μm, 60μm

Applicable PH Range: 1~13

Max Pressure Drop: Forward 0.4Mpa

Working Temperature: Below 70°C under 0.25Mpa

Sterilization: Resist online steam sterilization at 126°C for 30 minutes

Endotoxin: Tested by LAL method, endotoxin content of water extract is lower than 0.5EU/ml